Command directory path : /vis/


Guidance :
Visualization commands.

 Sub-directories : 
   /vis/ASCIITree/   Commands for ASCIITree control.
   /vis/GAGTree/   Commands for GAGTree control.
   /vis/rayTracer/   RayTracer commands.
   /vis/scene/   Operations on Geant4 scenes.
   /vis/sceneHandler/   Operations on Geant4 scene handlers.
   /vis/viewer/   Operations on Geant4 viewers.
 Commands : 
   enable * /vis/enable [true|false]
   disable * Disables visualization system.
   verbose * /vis/verbose [<verbosity>]
   drawTree * /vis/drawTree [<physical-volume-name>] [<system>]
   drawVolume * /vis/drawVolume [<physical-volume-name>]
   drawView * /vis/drawView [<theta-deg>] [<phi-deg>] [<pan-right>] [<pan-up>] [<pan-unit>] [<zoom-factor>] [<dolly>] [<dolly-unit>]
   open * /vis/open [<graphics-system-name>] [<pixels>]
   specify * /vis/specify <logical-volume-name>


Command /vis/enable
Guidance :
/vis/enable [true|false]
Enables/disables visualization system.

Parameter : enabled
 Parameter type  : b
 Omittable       : True
 Default value   : 1



Command /vis/disable
Guidance :
Disables visualization system.



Command /vis/verbose
Guidance :
/vis/verbose [<verbosity>]

  default:    warnings
Simple graded message scheme - digit or string (1st character defines):
  0) quiet,         // Nothing is printed.
  1) startup,       // Startup and endup messages are printed...
  2) errors,        // ...and errors...
  3) warnings,      // ...and warnings...
  4) confirmations, // ...and confirming messages...
  5) parameters,    // ...and parameters of scenes and views...
  6) all            // ...and everything available.

Parameter : verbosity
 Parameter type  : s
 Omittable       : True
 Default value   : warnings



Command /vis/drawTree
Guidance :
/vis/drawTree [<physical-volume-name>] [<system>]
Default: world ATree
(DTREE) Creates a scene consisting of this physical volume and
  produces a represntation of the geometry hieracrhy.
The scene becomes current.

Parameter : PVname
 Parameter type  : s
 Omittable       : True
 Default value   : world

Parameter : system
 Parameter type  : s
 Omittable       : True
 Default value   : ATree



Command /vis/drawVolume
Guidance :
/vis/drawVolume [<physical-volume-name>]
Default: world volume
Creates a scene consisting of this physical volume and asks the
  current viewer to draw it.
The scene becomes current.

Parameter : physical-volume-name
 Parameter type  : s
 Omittable       : True
 Default value   : world



Command /vis/drawView
Guidance :
/vis/drawView [<theta-deg>] [<phi-deg>] [<pan-right>] [<pan-up>] [<pan-unit>] [<zoom-factor>] [<dolly>] [<dolly-unit>]
Default: 0 0 0 0 cm 1 0 cm

Parameter : theta-deg
 Parameter type  : d
 Omittable       : True
 Default value   : 0

Parameter : phi-deg
 Parameter type  : d
 Omittable       : True
 Default value   : 0

Parameter : pan-right
 Parameter type  : d
 Omittable       : True
 Default value   : 0

Parameter : pan-up
 Parameter type  : d
 Omittable       : True
 Default value   : 0

Parameter : pan-unit
 Parameter type  : s
 Omittable       : True
 Default value   : cm

Parameter : zoom-factor
 Parameter type  : d
 Omittable       : True
 Default value   : 1

Parameter : dolly
 Parameter type  : d
 Omittable       : True
 Default value   : 0

Parameter : dolly-unit
 Parameter type  : s
 Omittable       : True
 Default value   : cm



Command /vis/open
Guidance :
/vis/open [<graphics-system-name>] [<pixels>]
For this graphics system, creates a scene handler ready for drawing.
The scene handler becomes current.
The scene handler name is auto-generated.
The 2nd parameter is the window size hint.

Parameter : graphics-system-name
 Parameter type  : s
 Omittable       : False
 Candidates      : XXX ATree DAWNFILE GAGTree HepRepFile RayTracer VRML1FILE VRML2FILE DAWN Wo Xo OGLIX OGLSX OGLIXm OGLSXm OIX VRML1 VRML2

Parameter : pixels
 Parameter type  : i
 Omittable       : True
 Default value   : 600



Command /vis/specify
Guidance :
/vis/specify <logical-volume-name>
Creates a scene consisting of this logical volume and asks the
  current viewer to draw it and the geometry to print the
  specification.
The scene becomes current.

Parameter : logical-volume-name
 Parameter type  : s
 Omittable       : False

Command directory path : /vis/ASCIITree/


Guidance :
Commands for ASCIITree control.

 Sub-directories : 
 Commands : 
   verbose * /vis/ASCIITree/verbose [<verbosity>]


Command /vis/ASCIITree/verbose
Guidance :
/vis/ASCIITree/verbose [<verbosity>]
0 (default) mimimum - 10 maximum printing.

Parameter : verbosity
 Parameter type  : i
 Omittable       : True
 Default value   : taken from the current value

Command directory path : /vis/GAGTree/


Guidance :
Commands for GAGTree control.

 Sub-directories : 
 Commands : 
   verbose * /vis/GAGTree/verbose [<verbosity>]


Command /vis/GAGTree/verbose
Guidance :
/vis/GAGTree/verbose [<verbosity>]
0 (default) mimimum - 10 maximum printing.

Parameter : verbosity
 Parameter type  : i
 Omittable       : True
 Default value   : taken from the current value

Command directory path : /vis/rayTracer/


Guidance :
RayTracer commands.

 Sub-directories : 
 Commands : 
   trace * Start the ray tracing.
   column * Define the number of horizontal pixels.
   row * Define the number of virtical pixels.
   target * Define the center position of the target.
   eyePosition * Define the eye position.
   lightDirection * Define the direction of illumination light.
   span * Define the angle per 100 pixels.
   headAngle * Define the head direction.
   attenuation * Define the attenuation length for transparent material.
   distortion * Distortion effect of the fish eye lens.
   ignoreTransparency * Ignore transparency even if the alpha of G4Colour < 1.


Command /vis/rayTracer/trace
Guidance :
Start the ray tracing.
Define the name of output JPEG file.

Parameter : fileName
 Parameter type  : s
 Omittable       : True
 Default value   : g4RayTracer.jpeg



Command /vis/rayTracer/column
Guidance :
Define the number of horizontal pixels.
 Range of parameters : nPixel > 0

Parameter : nPixel
 Parameter type  : i
 Omittable       : False



Command /vis/rayTracer/row
Guidance :
Define the number of virtical pixels.
 Range of parameters : nPixel > 0

Parameter : nPixel
 Parameter type  : i
 Omittable       : False



Command /vis/rayTracer/target
Guidance :
Define the center position of the target.

Parameter : X
 Parameter type  : d
 Omittable       : True
 Default value   : 0

Parameter : Y
 Parameter type  : d
 Omittable       : True
 Default value   : 0

Parameter : Z
 Parameter type  : d
 Omittable       : True
 Default value   : 0

Parameter : Unit
 Parameter type  : s
 Omittable       : True
 Default value   : m
 Candidates      : pc km m cm mm mum nm Ang fm parsec kilometer meter centimeter millimeter micrometer nanometer angstrom fermi



Command /vis/rayTracer/eyePosition
Guidance :
Define the eye position.
Eye direction is calsurated from (target - eyePosition).

Parameter : X
 Parameter type  : d
 Omittable       : True
 Default value   : 0

Parameter : Y
 Parameter type  : d
 Omittable       : True
 Default value   : 0

Parameter : Z
 Parameter type  : d
 Omittable       : True
 Default value   : 0

Parameter : Unit
 Parameter type  : s
 Omittable       : True
 Default value   : m
 Candidates      : pc km m cm mm mum nm Ang fm parsec kilometer meter centimeter millimeter micrometer nanometer angstrom fermi



Command /vis/rayTracer/lightDirection
Guidance :
Define the direction of illumination light.
The vector needs not to be a unit vector, but it must not be a zero vector.
 Range of parameters : Px != 0 || Py != 0 || Pz != 0

Parameter : Px
 Parameter type  : d
 Omittable       : True
 Default value   : 0.1

Parameter : Py
 Parameter type  : d
 Omittable       : True
 Default value   : 0.2

Parameter : Pz
 Parameter type  : d
 Omittable       : True
 Default value   : 0.3



Command /vis/rayTracer/span
Guidance :
Define the angle per 100 pixels.
 Range of parameters : span>0.

Parameter : span
 Parameter type  : d
 Omittable       : True
 Default value   : 50

Parameter : Unit
 Parameter type  : s
 Omittable       : True
 Default value   : deg
 Candidates      : rad mrad sr deg radian milliradian steradian degree



Command /vis/rayTracer/headAngle
Guidance :
Define the head direction.
 Range of parameters : headAngle>=0. && headAngle<360.

Parameter : headAngle
 Parameter type  : d
 Omittable       : True
 Default value   : 270

Parameter : Unit
 Parameter type  : s
 Omittable       : True
 Default value   : deg
 Candidates      : rad mrad sr deg radian milliradian steradian degree



Command /vis/rayTracer/attenuation
Guidance :
Define the attenuation length for transparent material.
Note that this value is independent to the attenuation length for the optical photon processes.
 Range of parameters : Length > 0.

Parameter : Length
 Parameter type  : d
 Omittable       : True
 Default value   : 1

Parameter : Unit
 Parameter type  : s
 Omittable       : True
 Default value   : m
 Candidates      : pc km m cm mm mum nm Ang fm parsec kilometer meter centimeter millimeter micrometer nanometer angstrom fermi



Command /vis/rayTracer/distortion
Guidance :
Distortion effect of the fish eye lens.

Parameter : flag
 Parameter type  : b
 Omittable       : True
 Default value   : 0



Command /vis/rayTracer/ignoreTransparency
Guidance :
Ignore transparency even if the alpha of G4Colour < 1.

Parameter : flag
 Parameter type  : b
 Omittable       : True
 Default value   : 0

Command directory path : /vis/scene/


Guidance :
Operations on Geant4 scenes.

 Sub-directories : 
   /vis/scene/add/   Add model to current scene.
 Commands : 
   create * /vis/scene/create [<scene-name>]
   endOfEventAction * /vis/scene/endOfEventAction [accumulate|refresh]
   list * /vis/scene/list [<scene-name>] [<verbosity>]
   notifyHandlers * /vis/scene/notifyHandlers [<scene-name>] [r[efresh]|f[lush]]
   remove * /vis/scene/remove <scene-name>
   select * /vis/scene/select [<scene-name>]


Command /vis/scene/create
Guidance :
/vis/scene/create [<scene-name>]
Creates an empty scene.
Invents a name if not supplied.
This scene becomes current.

Parameter : scene-name
 Parameter type  : s
 Omittable       : True
 Default value   : taken from the current value



Command /vis/scene/endOfEventAction
Guidance :
/vis/scene/endOfEventAction [accumulate|refresh]
Requests viewer to refresh hits, tracks, etc., at end of event.
  Or they are accumulated.  Detector remains or is redrawn.

Parameter : action
 Parameter type  : s
 Omittable       : True
 Default value   : refresh
 Candidates      : accumulate refresh



Command /vis/scene/list
Guidance :
/vis/scene/list [<scene-name>] [<verbosity>]
Lists scene(s).
<scene-name> default is "all"
See /vis/verbose for definition of verbosity.

Parameter : scene-name
 Parameter type  : s
 Omittable       : True
 Default value   : all

Parameter : verbosity
 Parameter type  : s
 Omittable       : True
 Default value   : 0



Command /vis/scene/notifyHandlers
Guidance :
/vis/scene/notifyHandlers [<scene-name>] [r[efresh]|f[lush]]
Notifies scene handlers of possible changes of scene.
<scene-name> default is current scene name.
Clears and refreshes all viewers of current scene.
  The default action "refresh" does not issue "update" (see
    /vis/viewer/update).
If "flush" is specified, it issues an "update" as well as
  "refresh".  Useful for refreshing and initiating post-processing
  for graphics systems which need post-processing.
This command does not change current scene, scene handler or viewer.

Parameter : scene-name
 Parameter type  : s
 Omittable       : True
 Default value   : taken from the current value

Parameter : refresh-flush
 Parameter type  : s
 Omittable       : True
 Default value   : refresh



Command /vis/scene/remove
Guidance :
/vis/scene/remove <scene-name>
Removes scenes.
/vis/scene/list to see possibilities.

Parameter : scene-name
 Parameter type  : s
 Omittable       : False
 Default value   : taken from the current value



Command /vis/scene/select
Guidance :
/vis/scene/select [<scene-name>]
Selects current scene.
Specify scene by name ("/vis/scene/list" to see possibilities).

Parameter : scene-name
 Parameter type  : s
 Omittable       : True
 Default value   : taken from the current value

Command directory path : /vis/scene/add/


Guidance :
Add model to current scene.

 Sub-directories : 
 Commands : 
   axes * /vis/scene/add/axes [<x0>] [<y0>] [<z0>] [<length>] [<unit>]
   ghosts * /vis/scene/add/ghosts [<particle-name>]
   hits * Adds hits to current scene.
   logicalVolume * /vis/scene/add/logicalVolume <logical-volume-name> [<depth-of-descending>]
   scale * /vis/scene/add/scale [<length> <length-unit>] [x|y|z] [<red>] [<green>] [<blue>] [auto|manual] [<xmid> <ymid> <zmid> <unit>]
   text * Adds text at (x, y, z) unit font_size x_offset y_offset text.
   trajectories * Adds trajectories to current scene.
   volume * /vis/scene/add/volume [<physical-volume-name>] [<copy-no>] [<depth-of-descending>]


Command /vis/scene/add/axes
Guidance :
/vis/scene/add/axes [<x0>] [<y0>] [<z0>] [<length>] [<unit>]
Default: 0 0 0 1 m
Draws axes at (x0, y0, z0) of given length.

Parameter : x0
 Parameter type  : d
 Omittable       : True
 Default value   : 0

Parameter : y0
 Parameter type  : d
 Omittable       : True
 Default value   : 0

Parameter : z0
 Parameter type  : d
 Omittable       : True
 Default value   : 0

Parameter : length
 Parameter type  : d
 Omittable       : True
 Default value   : 1

Parameter : unit
mm, cm, or m.
 Parameter type  : s
 Omittable       : True
 Default value   : m



Command /vis/scene/add/ghosts
Guidance :
/vis/scene/add/ghosts [<particle-name>]
Adds ghost volumes (G4FlavoredParallelWorld) to the current scene.
Selects by particle (default = "all").

Parameter : particle
 Parameter type  : s
 Omittable       : True
 Default value   : all



Command /vis/scene/add/hits
Guidance :
Adds hits to current scene.
Hits are drawn at end of event when the scene in which they are added is current.



Command /vis/scene/add/logicalVolume
Guidance :
/vis/scene/add/logicalVolume <logical-volume-name> [<depth-of-descending>]
Adds a logical volume to the current scene.
1st parameter: volume name.
2nd parameter: depth of descending geometry hierarchy (default 1).

Parameter : volume
 Parameter type  : s
 Omittable       : False

Parameter : depth
 Parameter type  : i
 Omittable       : True
 Default value   : 1



Command /vis/scene/add/scale
Guidance :
/vis/scene/add/scale [<length> <length-unit>] [x|y|z] [<red>] [<green>] [<blue>] [auto|manual] [<xmid> <ymid> <zmid> <unit>]
Defaults: 1 m x 1 0 0 auto 0 0 0 m
Adds an annotated scale line to the current scene.
An annotated line in the specified direction with tick marks at the
end.  If autoPlacing is true it is required to be centred at the
front, right, bottom corner of the world space, comfortably outside
the existing bounding box/sphere so that existing objects do not
obscure it.  Otherwise it is required to be drawn with mid-point at
(xmid, ymid, zmid).

The auto placing algorithm might be:
  x = xmin + (1 + comfort) * (xmax - xmin)
  y = ymin - comfort * (ymax - ymin)
  z = zmin + (1 + comfort) * (zmax - zmin)
  if direction == x then (x - length,y,z) to (x,y,z)
  if direction == y then (x,y,z) to (x,y + length,z)
  if direction == z then (x,y,z - length) to (x,y,z)

Parameter : length
 Parameter type  : d
 Omittable       : True
 Default value   : 1

Parameter : unit
 Parameter type  : s
 Omittable       : True
 Default value   : m

Parameter : direction
 Parameter type  : s
 Omittable       : True
 Default value   : x

Parameter : red
 Parameter type  : d
 Omittable       : True
 Default value   : 1

Parameter : green
 Parameter type  : d
 Omittable       : True
 Default value   : 0

Parameter : blue
 Parameter type  : d
 Omittable       : True
 Default value   : 0

Parameter : auto|manual
 Parameter type  : s
 Omittable       : True
 Default value   : auto

Parameter : xmid
 Parameter type  : d
 Omittable       : True
 Default value   : 0

Parameter : ymid
 Parameter type  : d
 Omittable       : True
 Default value   : 0

Parameter : zmid
 Parameter type  : d
 Omittable       : True
 Default value   : 0

Parameter : unit
 Parameter type  : s
 Omittable       : True
 Default value   : m



Command /vis/scene/add/text
Guidance :
Adds text at (x, y, z) unit font_size x_offset y_offset text.
Font size and offsets in pixels.

Parameter : x
 Parameter type  : d
 Omittable       : True
 Default value   : 0

Parameter : y
 Parameter type  : d
 Omittable       : True
 Default value   : 0

Parameter : z
 Parameter type  : d
 Omittable       : True
 Default value   : 0

Parameter : unit
mm, cm, or m.
 Parameter type  : s
 Omittable       : True
 Default value   : mm

Parameter : font_size
 Parameter type  : d
 Omittable       : True
 Default value   : 0

Parameter : x_offset
 Parameter type  : d
 Omittable       : True
 Default value   : 0

Parameter : y_offset
 Parameter type  : d
 Omittable       : True
 Default value   : 0

Parameter : text
 Parameter type  : s
 Omittable       : True
 Default value   : text



Command /vis/scene/add/trajectories
Guidance :
Adds trajectories to current scene.
Trajectories are drawn at end of event when the scene in which they are added is current.



Command /vis/scene/add/volume
Guidance :
/vis/scene/add/volume [<physical-volume-name>] [<copy-no>] [<depth-of-descending>]
Adds a physical volume to the current scene.
Note: adds first occurence only.
1st parameter: volume name (default "world").
2nd parameter: copy number (default -1).
  If negative, first occurrence of physical-volume-name is selected.
3rd parameter: depth of descending geometry hierarchy (default G4Scene::UNLIMITED (-1)).

Parameter : volume
 Parameter type  : s
 Omittable       : True
 Default value   : world

Parameter : copy-no
 Parameter type  : i
 Omittable       : True
 Default value   : -1

Parameter : depth
 Parameter type  : i
 Omittable       : True
 Default value   : -1

Command directory path : /vis/sceneHandler/


Guidance :
Operations on Geant4 scene handlers.

 Sub-directories : 
 Commands : 
   attach * /vis/sceneHandler/attach [<scene-name>]
   create * /vis/sceneHandler/create
   list * /vis/sceneHandler/list [<scene-handler-name>] [<verbosity>]
   remove * /vis/sceneHandler/remove <scene-handler-name>
   select * /vis/sceneHandler/select [<scene-handler-name>]


Command /vis/sceneHandler/attach
Guidance :
/vis/sceneHandler/attach [<scene-name>]
Attaches scene to current scene handler.
If scene-name is omitted, current scene is attached.
To see scenes and scene handlers, use "/vis/scene/list"
  and "/vis/sceneHandler/list"

Parameter : scene-name
 Parameter type  : s
 Omittable       : True
 Default value   : taken from the current value



Command /vis/sceneHandler/create
Guidance :
/vis/sceneHandler/create
     [<graphics-system-name>] [<scene-handler-name>]
Creates an scene handler for a specific graphics system.
Attaches current scene, if any.  You can change attached scenes with
  /vis/sceneHandler/attach [<scene-name>].
Default graphics system is current graphics system.
Invents a scene handler name if not supplied.
This scene handler becomes current.

Parameter : graphics-system-name
 Parameter type  : s
 Omittable       : True
 Default value   : error
 Candidates      : XXX ATree DAWNFILE GAGTree HepRepFile RayTracer VRML1FILE VRML2FILE DAWN Wo Xo OGLIX OGLSX OGLIXm OGLSXm OIX VRML1 VRML2

Parameter : scene-handler-name
 Parameter type  : s
 Omittable       : True
 Default value   : taken from the current value



Command /vis/sceneHandler/list
Guidance :
/vis/sceneHandler/list [<scene-handler-name>] [<verbosity>]
Lists scene handler(s).
<scene-handler-name> default is "all"
See /vis/verbose for definition of verbosity.

Parameter : scene-handler-name
 Parameter type  : s
 Omittable       : True
 Default value   : all

Parameter : verbosity
 Parameter type  : s
 Omittable       : True
 Default value   : 0



Command /vis/sceneHandler/remove
Guidance :
/vis/sceneHandler/remove <scene-handler-name>
Removes scene handlers.
Specify scene handler by name ("/vis/sceneHandler/list"
  to see possibilities).

Parameter : scene-handler-name
 Parameter type  : s
 Omittable       : False
 Default value   : taken from the current value



Command /vis/sceneHandler/select
Guidance :
/vis/sceneHandler/select [<scene-handler-name>]
Selects current scene handler.
Specify scene handler by name ("/vis/sceneHandler/list"
  to see possibilities).

Parameter : scene-handler-name
 Parameter type  : s
 Omittable       : True
 Default value   : taken from the current value

Command directory path : /vis/viewer/


Guidance :
Operations on Geant4 viewers.

 Sub-directories : 
   /vis/viewer/set/   Set view parameters of current viewer.
 Commands : 
   clear * /vis/viewer/clear [<viewer-name>]
   create * /vis/viewer/create  [<scene-handler>] [<viewer-name>] [<pixels>]
   dolly * /vis/viewer/dolly [<increment>] [<unit>]
   dollyTo * /vis/viewer/dollyTo [<distance>] [<unit>]
   flush * /vis/viewer/flush [<viewer-name>]
   lightsThetaPhi * /vis/viewer/lightsThetaPhi  [<theta>] [<phi>] [deg|rad]
   lightsVector * /vis/viewer/lightsVector  [<x>] [<y>] [<z>]
   list * /vis/viewer/list [<viewer-name>] [<verbosity>]
   pan * /vis/viewer/pan [<right-increment>] [<up-increment>] [<unit>]
   panTo * /vis/viewer/panTo [<right>] [<up>] [<unit>]
   refresh * /vis/viewer/refresh [<viewer-name>]
   remove * /vis/viewer/remove <viewer-name>
   reset * /vis/viewer/reset [<viewer-name>]
   select * /vis/viewer/select <viewer-name>
   update * /vis/viewer/update [<viewer-name>]
   show * Synonym for "/vis/viewer/update" - see that command for guidance.
   viewpointThetaPhi * /vis/viewer/viewpointThetaPhi  [<theta>] [<phi>] [deg|rad]
   viewpointVector * /vis/viewer/viewpointVector  [<x>] [<y>] [<z>]
   zoom * /vis/viewer/zoom [<multiplier>]
   zoomTo * /vis/viewer/zoomTo [<factor>]


Command /vis/viewer/clear
Guidance :
/vis/viewer/clear [<viewer-name>]
Clears viewer.
Viewer becomes current.
Specify viewer by name ("/vis/viewer/list"
  to see possibilities).

Parameter : viewer-name
 Parameter type  : s
 Omittable       : True
 Default value   : taken from the current value



Command /vis/viewer/create
Guidance :
/vis/viewer/create  [<scene-handler>] [<viewer-name>] [<pixels>]
Creates an viewer for a specific scene handler.
Default scene handler is the current scene handler.
Invents a name if not supplied.  (Note: the system adds information
to the name for identification - only the characters up to the first
blank are used for removing, selecting, etc.)
The 3rd parameter is a window size hint.
This scene handler and viewer become current.

Parameter : scene-handler
 Parameter type  : s
 Omittable       : True
 Default value   : taken from the current value

Parameter : viewer-name
 Parameter type  : s
 Omittable       : True
 Default value   : taken from the current value

Parameter : pixels
 Parameter type  : d
 Omittable       : True
 Default value   : taken from the current value



Command /vis/viewer/dolly
Guidance :
/vis/viewer/dolly [<increment>] [<unit>]
Moves the camera incrementally in by this distance.

Parameter : increment
 Parameter type  : d
 Omittable       : True
 Default value   : taken from the current value

Parameter : Unit
 Parameter type  : s
 Omittable       : True
 Default value   : m
 Candidates      : pc km m cm mm mum nm Ang fm parsec kilometer meter centimeter millimeter micrometer nanometer angstrom fermi



Command /vis/viewer/dollyTo
Guidance :
/vis/viewer/dollyTo [<distance>] [<unit>]
Moves the camera in this distance relative to standard target point.

Parameter : distance
 Parameter type  : d
 Omittable       : True
 Default value   : taken from the current value

Parameter : Unit
 Parameter type  : s
 Omittable       : True
 Default value   : m
 Candidates      : pc km m cm mm mum nm Ang fm parsec kilometer meter centimeter millimeter micrometer nanometer angstrom fermi



Command /vis/viewer/flush
Guidance :
/vis/viewer/flush [<viewer-name>]
Compound command: /vis/viewer/refresh + /vis/viewer/update.
Useful for refreshing and initiating post-processing for graphics
  systems which need post-processing.  Viewer becomes current.
Specify viewer by name ("/vis/viewer/list"
  to see possibilities).

Parameter : viewer-name
 Parameter type  : s
 Omittable       : True
 Default value   : taken from the current value



Command /vis/viewer/lightsThetaPhi
Guidance :
/vis/viewer/lightsThetaPhi  [<theta>] [<phi>] [deg|rad]
Set direction from target to lights.

Parameter : theta
 Parameter type  : d
 Omittable       : True
 Default value   : taken from the current value

Parameter : phi
 Parameter type  : d
 Omittable       : True
 Default value   : taken from the current value

Parameter : unit
 Parameter type  : s
 Omittable       : True
 Default value   : deg



Command /vis/viewer/lightsVector
Guidance :
/vis/viewer/lightsVector  [<x>] [<y>] [<z>]
Set direction from target to lights.

Parameter : x
 Parameter type  : d
 Omittable       : True
 Default value   : taken from the current value

Parameter : y
 Parameter type  : d
 Omittable       : True
 Default value   : taken from the current value

Parameter : z
 Parameter type  : d
 Omittable       : True
 Default value   : taken from the current value



Command /vis/viewer/list
Guidance :
/vis/viewer/list [<viewer-name>] [<verbosity>]
Lists viewers(s).
<viewer-name> default is "all"
See /vis/verbose for definition of verbosity.

Parameter : viewer-name
 Parameter type  : s
 Omittable       : True
 Default value   : all

Parameter : verbosity
 Parameter type  : s
 Omittable       : True
 Default value   : 0



Command /vis/viewer/pan
Guidance :
/vis/viewer/pan [<right-increment>] [<up-increment>] [<unit>]
Moves the camera incrementally right and up by these amounts.

Parameter : right-increment
 Parameter type  : d
 Omittable       : True
 Default value   : taken from the current value

Parameter : up-increment
 Parameter type  : d
 Omittable       : True
 Default value   : taken from the current value

Parameter : unit
 Parameter type  : s
 Omittable       : True
 Default value   : m



Command /vis/viewer/panTo
Guidance :
/vis/viewer/panTo [<right>] [<up>] [<unit>]
Moves the camera to this position right and up relative to standardtarget point (as seen from viewpoint direction).

Parameter : right
 Parameter type  : d
 Omittable       : True
 Default value   : taken from the current value

Parameter : up
 Parameter type  : d
 Omittable       : True
 Default value   : taken from the current value

Parameter : unit
 Parameter type  : s
 Omittable       : True
 Default value   : m



Command /vis/viewer/refresh
Guidance :
/vis/viewer/refresh [<viewer-name>]
Refreshes viewer.
Viewer becomes current.
Specify viewer by name ("/vis/viewer/list"
  to see possibilities).

Parameter : viewer-name
 Parameter type  : s
 Omittable       : True
 Default value   : taken from the current value



Command /vis/viewer/remove
Guidance :
/vis/viewer/remove <viewer-name>
Removes viewer.
Specify viewer by name ("/vis/viewer/list"
  to see possibilities).

Parameter : viewer-name
 Parameter type  : s
 Omittable       : False
 Default value   : taken from the current value



Command /vis/viewer/reset
Guidance :
/vis/viewer/reset [<viewer-name>]
Resets viewer.
Viewer becomes current.
Specify viewer by name ("/vis/viewer/list"
  to see possibilities).

Parameter : viewer-name
 Parameter type  : s
 Omittable       : True
 Default value   : taken from the current value



Command /vis/viewer/select
Guidance :
/vis/viewer/select <viewer-name>
Selects current viewer.
Specify viewer by name ("/vis/viewer/list"
  to see possibilities).

Parameter : viewer-name
 Parameter type  : s
 Omittable       : False
 Default value   : taken from the current value



Command /vis/viewer/update
Guidance :
/vis/viewer/update [<viewer-name>]
Triggers graphical database post-processing for viewers using that technique.
For such viewers the view only becomes visible with this command.
Viewer becomes current.
Specify viewer by name ("/vis/viewer/list"
  to see possibilities).

Parameter : viewer-name
 Parameter type  : s
 Omittable       : True
 Default value   : taken from the current value



Command /vis/viewer/show
Guidance :
Synonym for "/vis/viewer/update" - see that command for guidance.

Parameter : viewer-name
 Parameter type  : s
 Omittable       : True
 Default value   : taken from the current value



Command /vis/viewer/viewpointThetaPhi
Guidance :
/vis/viewer/viewpointThetaPhi  [<theta>] [<phi>] [deg|rad]
Set direction from target to camera.  Also changes lightpoint direction
if lights are set to move with camera.

Parameter : theta
 Parameter type  : d
 Omittable       : True
 Default value   : taken from the current value

Parameter : phi
 Parameter type  : d
 Omittable       : True
 Default value   : taken from the current value

Parameter : unit
 Parameter type  : s
 Omittable       : True
 Default value   : deg



Command /vis/viewer/viewpointVector
Guidance :
/vis/viewer/viewpointVector  [<x>] [<y>] [<z>]
Set direction from target to camera.  Also changes lightpoint direction
if lights are set to move with camera.

Parameter : x
 Parameter type  : d
 Omittable       : True
 Default value   : taken from the current value

Parameter : y
 Parameter type  : d
 Omittable       : True
 Default value   : taken from the current value

Parameter : z
 Parameter type  : d
 Omittable       : True
 Default value   : taken from the current value



Command /vis/viewer/zoom
Guidance :
/vis/viewer/zoom [<multiplier>]
Multiplies magnification by this factor.

Parameter : multiplier
 Parameter type  : d
 Omittable       : True
 Default value   : taken from the current value



Command /vis/viewer/zoomTo
Guidance :
/vis/viewer/zoomTo [<factor>]
Magnifies by this factor relative to standard view.

Parameter : factor
 Parameter type  : d
 Omittable       : True
 Default value   : taken from the current value

Command directory path : /vis/viewer/set/


Guidance :
Set view parameters of current viewer.

 Sub-directories : 
 Commands : 
   all * /vis/viewer/set/all <from-viewer-name>
Copies view parameters from from-viewer to current viewer.
   autoRefresh * /vis/viewer/set/autoRefresh [true|false]
   culling * /vis/viewer/set/culling global|coveredDaughters|invisible|density [true|false] [density] [unit]
   edge * /vis/viewer/set/edge [true|false]
   hiddenEdge * /vis/viewer/set/edge [true|false]
   hiddenMarker * /vis/viewer/set/hiddenMarker [true|false]
   lightsMove * /vis/viewer/set/lightsMove with-camera|with-object
   lightsThetaPhi * /vis/viewer/set/lightsThetaPhi  [<theta>] [<phi>] [deg|rad]
   lightsVector * /vis/viewer/set/lightsVector  [<x>] [<y>] [<z>]
   lineSegmentsPerCircle * /vis/viewer/set/lineSegmentsPerCircle  [<number-of-sides-per-circle>]
   projection * /vis/viewer/set/projection o[rthogonal]|p[erspective] [<field-half-angle>] [deg|rad]
   sectionPlane * Set plane for drawing section (DCUT).  Specify plane by
x y z units nx ny nz, e.g., for a y-z plane at x = 1 cm:
/vis/viewer/set/sectionPlane on 1 0 0 cm 1 0 0
   style * /vis/viewer/set/style wireframe|surface
   upThetaPhi * /vis/viewer/set/upThetaPhi  [<theta>] [<phi>] [deg|rad]
   upVector * /vis/viewer/set/upVector  [<x>] [<y>] [<z>]
   viewpointThetaPhi * /vis/viewer/set/viewpointThetaPhi  [<theta>] [<phi>] [deg|rad]
   viewpointVector * /vis/viewer/set/viewpointVector  [<x>] [<y>] [<z>]


Command /vis/viewer/set/all
Guidance :
/vis/viewer/set/all <from-viewer-name>
Copies view parameters from from-viewer to current viewer.

Parameter : from-viewer-name
 Parameter type  : s
 Omittable       : False



Command /vis/viewer/set/autoRefresh
Guidance :
/vis/viewer/set/autoRefresh [true|false]
View is automatically refreshed after a change of view parameters.

Parameter : auto-refresh
 Parameter type  : b
 Omittable       : True
 Default value   : 0



Command /vis/viewer/set/culling
Guidance :
/vis/viewer/set/culling global|coveredDaughters|invisible|density [true|false] [density] [unit]
If density option is true, provide threshold density and unit
Unit is g/cm3, mg/cm3 or kg/m3

Parameter : culling-option
 Parameter type  : s
 Omittable       : False
 Candidates      : global coveredDaughters invisible density

Parameter : flag
 Parameter type  : b
 Omittable       : True
 Default value   : true

Parameter : density
 Parameter type  : d
 Omittable       : True
 Default value   : 0.01

Parameter : unit
 Parameter type  : s
 Omittable       : True
 Default value   : g/cm3



Command /vis/viewer/set/edge
Guidance :
/vis/viewer/set/edge [true|false]

Parameter : edge
 Parameter type  : b
 Omittable       : True
 Default value   : 1



Command /vis/viewer/set/hiddenEdge
Guidance :
/vis/viewer/set/edge [true|false]

Parameter : hidden-edge
 Parameter type  : b
 Omittable       : True
 Default value   : 1



Command /vis/viewer/set/hiddenMarker
Guidance :
/vis/viewer/set/hiddenMarker [true|false]

Parameter : hidden-marker
 Parameter type  : b
 Omittable       : True
 Default value   : 1



Command /vis/viewer/set/lightsMove
Guidance :
/vis/viewer/set/lightsMove with-camera|with-object
Note: parameter will be parsed for "cam" or "obj".

Parameter : lightsMove
 Parameter type  : s
 Omittable       : False



Command /vis/viewer/set/lightsThetaPhi
Guidance :
/vis/viewer/set/lightsThetaPhi  [<theta>] [<phi>] [deg|rad]
Set direction from target to lights.

Parameter : theta
 Parameter type  : d
 Omittable       : True
 Default value   : taken from the current value

Parameter : phi
 Parameter type  : d
 Omittable       : True
 Default value   : taken from the current value

Parameter : unit
 Parameter type  : s
 Omittable       : True
 Default value   : deg



Command /vis/viewer/set/lightsVector
Guidance :
/vis/viewer/set/lightsVector  [<x>] [<y>] [<z>]
Set direction from target to lights.

Parameter : x
 Parameter type  : d
 Omittable       : True
 Default value   : taken from the current value

Parameter : y
 Parameter type  : d
 Omittable       : True
 Default value   : taken from the current value

Parameter : z
 Parameter type  : d
 Omittable       : True
 Default value   : taken from the current value



Command /vis/viewer/set/lineSegmentsPerCircle
Guidance :
/vis/viewer/set/lineSegmentsPerCircle  [<number-of-sides-per-circle>]
  Number of sides per circle in polygon/polyhedron graphical
representation of objects with curved lines/surfaces.

Parameter : line-segments
 Parameter type  : i
 Omittable       : True
 Default value   : 24



Command /vis/viewer/set/projection
Guidance :
/vis/viewer/set/projection o[rthogonal]|p[erspective] [<field-half-angle>] [deg|rad]
Note: 1st parameter will be parsed for first character "o" or "p".
Default: orthogonal 30 deg

Parameter : projection
 Parameter type  : s
 Omittable       : True
 Default value   : orthogonal

Parameter : field-half-angle
 Parameter type  : d
 Omittable       : True
 Default value   : 30

Parameter : unit
 Parameter type  : s
 Omittable       : True
 Default value   : deg



Command /vis/viewer/set/sectionPlane
Guidance :
Set plane for drawing section (DCUT).  Specify plane by
x y z units nx ny nz, e.g., for a y-z plane at x = 1 cm:
/vis/viewer/set/sectionPlane on 1 0 0 cm 1 0 0

Parameter : Selector
 Parameter type  : c
 Omittable       : True
 Default value   : ?

Parameter : x
Coordinate of point on the plane.
 Parameter type  : d
 Omittable       : True
 Default value   : 0

Parameter : y
Coordinate of point on the plane.
 Parameter type  : d
 Omittable       : True
 Default value   : 0

Parameter : z
Coordinate of point on the plane.
 Parameter type  : d
 Omittable       : True
 Default value   : 0

Parameter : unit
Unit of point on the plane.
 Parameter type  : s
 Omittable       : True
 Default value   : cm

Parameter : nx
Component of plane normal.
 Parameter type  : d
 Omittable       : True
 Default value   : 1

Parameter : ny
Component of plane normal.
 Parameter type  : d
 Omittable       : True
 Default value   : 0

Parameter : nz
Component of plane normal.
 Parameter type  : d
 Omittable       : True
 Default value   : 0



Command /vis/viewer/set/style
Guidance :
/vis/viewer/set/style wireframe|surface
Note: parameter will be parsed for first character "w" or "s".

Parameter : style
 Parameter type  : s
 Omittable       : False



Command /vis/viewer/set/upThetaPhi
Guidance :
/vis/viewer/set/upThetaPhi  [<theta>] [<phi>] [deg|rad]
Set up vector.  Viewer will attempt always to show this direction upwards.

Parameter : theta
 Parameter type  : d
 Omittable       : True
 Default value   : taken from the current value

Parameter : phi
 Parameter type  : d
 Omittable       : True
 Default value   : taken from the current value

Parameter : unit
 Parameter type  : s
 Omittable       : True
 Default value   : deg



Command /vis/viewer/set/upVector
Guidance :
/vis/viewer/set/upVector  [<x>] [<y>] [<z>]
Set up vector.  Viewer will attempt always to show this direction upwards.

Parameter : x
 Parameter type  : d
 Omittable       : True
 Default value   : taken from the current value

Parameter : y
 Parameter type  : d
 Omittable       : True
 Default value   : taken from the current value

Parameter : z
 Parameter type  : d
 Omittable       : True
 Default value   : taken from the current value



Command /vis/viewer/set/viewpointThetaPhi
Guidance :
/vis/viewer/set/viewpointThetaPhi  [<theta>] [<phi>] [deg|rad]
Set direction from target to camera.  Also changes lightpoint direction
if lights are set to move with camera.

Parameter : theta
 Parameter type  : d
 Omittable       : True
 Default value   : taken from the current value

Parameter : phi
 Parameter type  : d
 Omittable       : True
 Default value   : taken from the current value

Parameter : unit
 Parameter type  : s
 Omittable       : True
 Default value   : deg



Command /vis/viewer/set/viewpointVector
Guidance :
/vis/viewer/set/viewpointVector  [<x>] [<y>] [<z>]
Set direction from target to camera.  Also changes lightpoint direction
if lights are set to move with camera.

Parameter : x
 Parameter type  : d
 Omittable       : True
 Default value   : taken from the current value

Parameter : y
 Parameter type  : d
 Omittable       : True
 Default value   : taken from the current value

Parameter : z
 Parameter type  : d
 Omittable       : True
 Default value   : taken from the current value