All Geant4 processes, including the transportation of particles,
are treated generically. In spite of the name "tracking",
particles are not transported in the tracking category.
G4TrackingManager is an interface class which brokers
transactions between the event, track and tracking categories. An
instance of this class handles the message passing between the
upper hierarchical object, which is the event manager, and lower
hierarchical objects in the tracking category. The event manager is
a singleton instance of the
The tracking manager receives a track from the event manager and
takes the actions required to finish tracking it.
G4TrackingManager aggregates the pointers to
G4UserTrackingAction. Also there is a "use" relation to
G4SteppingManager plays an essential role in tracking the
particle. It takes care of all message passing between objects in
the different categories relevant to transporting a particle (for
example, geometry and interactions in matter). Its public method
Stepping() steers the stepping of the particle.
The algorithm to handle one step is given below.
If the particle stop (i.e. zero kinetic energy), each active atRest process proposes a step length in time based on the interaction it describes. And the process proposing the smallest step length will be invoked.
Each active discrete or continuous process must propose a step length based on the interaction it describes. The smallest of these step lengths is taken.
The geometry navigator calculates "Safety", the distance to the next volume boundary. If the minimum physical-step-length from the processes is shorter than "Safety", the physical-step-length is selected as the next step length. In this case, no further geometrical calculations will be performed.
If the minimum physical-step-length from the processes is longer than "Safety", the distance to the next boundary is re-calculated.
The smaller of the minimum physical-step-length and the geometric step length is taken.
All active continuous processes are invoked. Note that the particle's kinetic energy will be updated only after all invoked processes have completed. The change in kinetic energy will be the sum of the contributions from these processes.
The current track properties are updated before discrete processes are invoked. In the same time, the secondary particles created by processes are stored in SecondaryList. The updated properties are:
The kinetic energy of the particle is checked to see whether or not it has been terminated by a continuous process. If the kinetic energy goes down to zero, atRest processes will be applied at the next step if applicable.
The discrete process is invoked. After the invocation,
The track is checked to see whether or not it has been terminated by the discrete process.
"Safety" is updated.
If the step was limited by the volume boundary, push the particle into the next volume.
Handle hit information.
Invoke the user intervention
Save data to Trajectory.
Update the mean free paths of the discrete processes.
If the parent particle is still alive, reset the maximum interaction length of the discrete process which has occurred.
One step completed.
Only processes can change information of
and add secondary tracks via
G4VProcess is a base class of all processes and
it has 3 kinds of
GetPhysicalInteraction methods in order to
describe interactions generically.
If a user want to modify information of
he (or she) SHOULD create a special process for the purpose and
register the process to the particle.
G4Track keeps 'current' information of the particle.
(i.e. energy,momentum, position ,time and so on) and has 'static'
information (i.e. mass, charge, life and so on) also.
G4Track keeps information at the beginning
of the step while the
AlongStepDoIts are being
invoked for the step in progress.After finishing all
On the other hand,
updated after each invocation of a
G4Step stores the transient information of a step. This
includes the two endpoints of the step,
PostStepPoint, which contain the points' coordinates and
the volumes containing the points.
G4Step also stores the
change in track properties between the two points. These
properties, such as energy and momentum, are updated as the various
active processes are invoked.
Processes do NOT change any information of
directly in their
DoIt. Instead, they proposes
changes as a result of interactions
PostStepPoint based on proposed changes.
G4Track is updated
after finishing all
Track information may be accessed by invoking various
Get methods provided in the
class. For details, see
G4Track.hh header file
$G4INCLUDE. Typical information available includes:
Step and step-point information can be retrieved by invoking
Get methods provided in the
PostStepPoint. (Note: to get the energy deposited in the step, you cannot use this 'Delta energy'. You have to use 'Total energy deposit' as below.)
Particle change information can be accessed by invoking various
Get methods provided in the
Typical information available includes:
Secondary particles are passed as
G4Tracks from a physics
process to tracking.
G4ParticleChange provides the following
four methods for a physics process:
AddSecondary( G4Track* aSecondary )
AddSecondary( G4DynamicParticle* aSecondary )
AddSecondary( G4DynamicParticle* aSecondary, G4ThreeVector position )
AddSecondary( G4DynamicParticle* aSecondary, G4double time)
In all but the first, the construction of
G4Track is done in
the methods using information given by the arguments.
There are two classes which allow the user to intervene in the tracking. These are:
Each provides methods which allow the user access to the Geant4 kernel at specific points in the tracking.
Users SHOULD NOT (and CAN NOT) change
Only the exception is the
Note-2: Users have to be cautious to implement an unnatural/unphysical action in these user actions. See the section Killing Tracks in User Actions and Energy Conservation for more details.
The verbose information output flag can be turned on or off. The amount of information printed about the track/step, from brief to very detailed, can be controlled by the value of the verbose flag, for example,
G4UImanager* UI = G4UImanager::GetUIpointer(); UI->ApplyCommand("/tracking/verbose 1");
are default concrete classes provided by Geant4, which are derived from the
base classes, respectively.
G4Trajectory class object is created by
G4TrackingManager when a
is passed from the
G4Trajectory has the following data
G4TrajectoryPoint corresponds to a step point along
the path followed by the track. Its position is given by a
class object is created in the
AppendStep() method of
G4Trajectory and this method is invoked by
G4TrackingManager at the end of each step.
The first point is created when the
is created, thus the first point is the original vertex.
The creation of a trajectory can be controlled by invoking
G4TrackingManager::SetStoreTrajectory(G4bool). The UI
command /tracking/storeTrajectory _bool_ does the same. The
user can set this flag for each individual track from his/her
The user should not create trajectories for secondaries in a shower due to the large amount of memory consumed.
All the created trajectories in an event are stored in
G4TrajectoryContainer class object and this object will be
G4Event. To draw or print trajectories generated in
an event, the user may invoke the
ShowTrajectory() methods of
respectively, from his/her
G4UserEventAction::EndOfEventAction(). The geometry must be
drawn before the trajectory drawing. The color of the drawn
trajectory depends on the particle charge:
Due to improvements in
G4Navigator, a track
can execute more than one turn of its spiral trajectory without
being broken into smaller steps as long as the trajectory does not
cross a geometrical boundary. Thus a drawn trajectory may not be
transient classes; they are not available at the end of the event.
Thus, the concrete classes
G4VTrajectoryPoint are the only
ones a user may employ for end-of-event analysis or for
persistency. As mentioned above, the default classes which Geant4
have only very primitive quantities. The user can customize his/her
own trajectory and trajectory point classes by deriving directly
from the respective base classes.
To use the customized trajectory, the user must construct a
concrete trajectory class object in the
G4UserTrackingAction::PreUserTrackingAction() method and
make its pointer available to
G4TrackingManager by using the
SetTrajectory() method. The customized trajectory point
class object must be constructed in the
of the user's implementation of the trajectory class. This
AppendStep() method will be invoked by
To customize trajectory drawing, the user can override the
DrawTrajectory() method in his/her own trajectory class.
When a customized version of G4Trajectory declares any new class
variables, operator new and
operator delete must be
provided. It is also useful to check that the allocation size in
operator new is equal to
sizeof(G4Trajectory). These two points do not
G4VTrajectory because it has no
operator new or operator delete.