Mandatory User Actions and Initializations

Three user initialization class objects are registered with the run manager (Manage the run procedures) in the user’s main() program, which takes ownership. The user must not delete these objects directly, and they must be created using ‘new’. Within the G4UserActionInitialization class ( User Action Initialization), the user must instantiate and register a concrete G4VUserPrimaryGeneratorAction subclass, which generates the primary particles for each event.

G4VUserDetectorConstruction

Listing 80 G4VUserDetectorConstruction
class G4VUserDetectorConstruction
{
  public:
    G4VUserDetectorConstruction();
    virtual ~G4VUserDetectorConstruction();

  public:
    virtual G4VPhysicalVolume* Construct() = 0;
    virtual void ConstructSDandField() = 0;
};

In the Construct() method, material and geometry has to be described. Detailed discussions on material and geometry are given in How to Specify Materials in the Detector and How to Define a Detector Geometry. Detector sensitivity and electromagnetic field should be defined in ConstructSDandField(), as objects defined in this method are thread-local if they are used in multi-threaded mode. Detailed discussions on Detector sensitivity and electromagnetic field are given in Hits and Electromagnetic Field.

Physics Lists

The concept of a physics list arises from the fact that Geant4 can not offer a single modeling algorithm to cover the entire energy domain from zero to the TeV scale, for all known processes and particles. Instead, a combination of ideas and approaches is typically used to perform a simulation task.

A schematic view of the Geant4 modeling of the processes of particle passage through matter may be presented as follows:

  • Physics Model = final state generator

  • Physics Process = cross section + model

  • Physics List = list of processes for each particle

The “patchwork” concept is especially true in the Geant4 hadronic physics domain: models are valid only over finite energy ranges, and there maybe competing models in the same range or one model maybe working better than the other for a specific group of particles, while its competitor may be better for other species. For this reason models have to be combined to cover the large energy range; every two adjacent models may have an overlap in their validity range.

G4VUserPhysicsList

This is an abstract class for constructing particles and processes. An introduction into the concept of the Geant4 Physics List and the Geant4 Physics Processes is also given in How to Specify Physics Processes and further in Physics Processes.

While the fabrication of a physics list is, in principle, a choice of a user, the toolkit is distributed with a number of pre-fabricated physics lists for the convenience of many user applications. These physics lists are supported by the Geant4 development team and can be recommended for specific physics tasks. However, based on the interests and needs of a specific project, a user may want to implement her or his own custom physics list.

The following sections offer several examples that show how to instantiate or select one or another pre-fabricated Physics List from the Geant4 standard collection, as well as guidance composing a custom Physics List from pre-fabricated components or even entirely from scratch.

To view the contents of a Physics List, there are two useful methods: DumpList() and DumpCutValueTable(G4int flag).

Reference Physics Lists

Number of ready to use Physics Lists are available with Geant4 kernel. Below an example of instantiation of FTFP_BERT Physics List class is shown. The full set of reference Physics Lists is described in Geant4 web.

Listing 81 Creating FTFP_BERT Physics List.
G4int verbose = 1;
FTFP_BERT* physlist = new FTFP_BERT(verbose);
runManager->SetUserInitialization(physlist);

Building Physics List Using Factory

Geant4 provides a class G4PhysListFactory allowing to defined Physics List by its name. The last for characters in the name defines an electromagnetic (EM) physics options. By default standard EM physics is used, “_EMV” corresponding to standard option1, “_EMX” - to standard option2, “_LIV” to EM Livermore physics, “_PEN” - to EM Penelope physics.

Listing 82 Creating Physics List by name.
G4int verbose = 1;
G4PhysListFactory factory;
G4VModularPhysicsList* physlist = factory.GetReferencePhysList("FTFP_BERT_EMV");
physlist.SetVerboseLevel(verbose);
runManager->SetUserInitialization(physlist);

The class G4PhysListFactory provides also another interface allowing to defined Physics List by the environment variable PHYSLIST.

Listing 83 Creating Physics List by name.
G4int verbose = 1;
G4PhysListFactory factory;
G4VModularPhysicsList* physlist = factory.ReferencePhysList();
physlist.SetVerboseLevel(verbose);
runManager->SetUserInitialization(physlist);

Building Physics List from Physics Builders

Technically speaking, one can implement physics list in a “flat-out” manner, i.e. specify all necessary particles and associated processes in a single piece of code, as it will be shown later in this document. However, for practical purposes it is often more convenient to group together certain categories and make implementation more modular.

One very useful concept is a Modular Physics List, G4VModularPhysicsList, that is a sub-class of G4VUserPhysicsLists and allows a user to organize physics processes into “building blocks”, or “modules”, then compose a physics list of such modules. The concept allows to group together, at a relatively high level, desired combinations of selected particles and related processes. One of the advantages of such approach is that it allows to combine pre-fabricated physics modules that are centrally provided by Geant4 kernel with user’s applications.

G4ModularPhysicsList has all the functionalities as G4VUserPhysicsList class, plus several additional functionalities. One of the important methods is RegisterPhysics(G4VPhysicsConstructor* ) for “registering” the above mentioned pre-fabricated physics modules. There also methods for removing or replacing physics modules.

Example below shows how G4VModularPhysList can be implemented.

Listing 84 Creating Physics List by name.
MyPhysicsList::MyPhysicsList():G4VModularPhysicsList()
{
  G4DataQuestionaire it(photon, neutron, no, no, no, neutronxs);
  G4cout << "<<< Geant4 Physics List: MyPhysicsList " <<G4endl;
  G4cout <<G4endl;
  defaultCutValue = 0.7*mm;
  G4int ver = 1;
  SetVerboseLevel(ver);

  // EM Physics
  RegisterPhysics( new G4EmStandardPhysics(ver) );

  // Synchroton Radiation & GN Physics
  RegisterPhysics( new G4EmExtraPhysics(ver) );
  // Decays
  RegisterPhysics( new G4DecayPhysics(ver) );

  // Hadron physics
  RegisterPhysics( new G4HadronElasticPhysicsXS(ver) );
  RegisterPhysics( new G4QStoppingPhysics(ver) );
  RegisterPhysics( new G4IonBinaryCascadePhysics(ver) );
  RegisterPhysics( new G4HadronInelasticQBBC(ver));

  // Neutron tracking cut
  RegisterPhysics( new G4NeutronTrackingCut(ver) );
}

Note that each module to be registered with a Modular Physics List is a G4VPhysicsConstructor (or a derived object), i.e. a “sublist” that holds groups of particles and accompanying physics processes. A user can find these and other similar modules in the source/physics_lists/list area of Geant4 core code, and can combine selected ones with custom modules, if desired.

In order to compose a custom physics module, two mandatory methods of a G4VPhysicsConstructor must be implemented: ConstructParticle() and ConstructProcess(); beyond that the implementation can be structured according to the developer’s taste.

Another useful concept in the modular approach to composing a Physics List is the concept of so called “builders”. This concept allows to encapsulate certain implementation details into smaller-scale software components, and offers the flexibility of re-using those component in different modules. At the general level, the scheme is this:

  • Particles (hadrons) are created, and physics models to be used to simulate applicable processes are specified, usually in a particular range of validity.

  • Physics processes for each particle type in the builder are created, and each process is outfitted with one or more hadronic physics models, as specified.

  • If necessary, a cross section data set for a given particle type is added.

This concept is widely used through the Geant4 hadronic domain, but the idea would be equally applicable in the electromagnetic area.

All builders can be found in the source/physics_lists/builders directory. There are basically two types of builders:

  • Particle Builders

  • Particle-Model Builders

A particle builder is somewhat “superior” here, as it specifies a particle or a group of particles, what category of processes are applicable, how to outfit a process with specified model(s), and how processes are to be registered with the G4ProcessManager. A particle-model builder instantiates a given model and implements details of associating it with one or more processes applicable to a given particle type. Some models can not be instantiated through a single interface class, but instead they need, in turn, to be composed from several components (examples are QGS and FTF).

Useful example builders to review and to consider as inspirations can be the following:

  • G4PiKBuilder (.hh and .cc) - groups pions and kaons, together with a list of associated hadronic processes.

  • G4BertiniPiKBuilder (.hh and .cc) - instantiates Bertini cascade model and implements how to outfit pion and kaon physics processes with this model. It also sets default validity range for the model.

  • G4FTFPPiKBuilder (.hh and .cc) - composes a high energy FTF-based model and implements how to outfit hadronic processes for pions and kaons with the model. This example illustrates that a hadronic model does not always have a single interface class, but it needs to be created from several components. In particular, in this builder a “high energy generator” object (G4TheoFSGenerator) is created and is outfitted with G4FTFModel string model (which also gives this builder its name), we well as string fragmentation algorithm and intra-nuclear transport model. Please note that the quasi-elastic scattering is not set as FTF model has its own mechanism for it. A cross-section data set is specified for pions. A default validity range is also specified.

One detail to remember is that, in principle, the validity range for a given model can be setup for each particle type individually. But in these referenced applications the validity range is setup to be the same for a group of particles (i.e. for a number of corresponding inelastic hadronic processes). Once a builder is instantiated, one can override the default validity range (via SetMinEnergy or SetMaxEnergy methods), but the new value will be, again, given to a group of particles/processes. Also note that the validity range can be overridden only before calling the Build() method of a builder. Again, the approach is just a specifics of this particular implementation. Obviously, if a limited validity range is selected for a specific particle/model/process, one has to supplement another model or several models, to cover the entire range.

One more useful class is the `` G4PhysicsListHelper`` which is a service class that wraps around the technicalities of the physics process registering in Geant4 and allows a user to easily associate a process with a particles, without knowing many details about various types of processes (discrete, continuous, etc.) and their internal ordering with G4ProcessManager. Curious users may eventually want to go deeper into details of G4ProcessManager class and, in particular, its group of AddProcess(...) methods, as it is the basis of G4PhysicsListHelper implementation. But for practical purposes, the use of G4PhysicsListHelper is likely to be sufficient in most cases.

Other useful details, including several elements of the software design philosophy and class diagrams, are given in How to Specify Physics Processes.

Building Physics List from Scratch

The user must derive a concrete class from G4VUserPhysicsList and implement three virtual methods:

  • ConstructParticle() to instantiate each requested particle type;

  • ConstructPhysics() to instantiate the desired physics processes and register each of them;

  • SetCuts(G4double aValue) to set a cut value in range for all particles in the particle table, which invokes the rebuilding of the physics table.

At early stage of the initialisation of Geant4 the method ConstructParticle() of G4VUserPhysicsList is invoked. The ConstructProcess() method must always invoke the AddTransportation() method in order to insure particle transportation. AddTransportation() must never be overridden. This is done automatically if G4VUserPhysicsList inherits of G4VModularPhysicsList. It is recommended for users as the most robust interface to Physics List. Geant4 examples demonstrate different methods how to create user Physics List.

User Action Initialization

All user action classes must be defined through the protected method SetUserAction(). Build() methods should be used for defining user action classes for worker threads as well as for the sequential mode. BuildForMaster() should be used only for defining UserRunAction for the master thread. BuildForMaster() is not invoked in the sequential mode. In case the user uses his/her own SteppingVerbose class, it must be instantiated in the method InitializeSteppingVerbose() and returned.

G4VUserActionInitialization

Listing 85 G4VUserActionInitialization
class G4VUserActionInitialization
{
  public:
    G4VUserActionInitialization();
    virtual ~G4VUserActionInitialization();

  public:
    virtual void Build() const = 0;
    virtual void BuildForMaster() const;
    virtual G4VSteppingVerbose* InitializeSteppingVerbose() const;

  protected:
    void SetUserAction(G4VUserPrimaryGeneratorAction*) const;
    void SetUserAction(G4UserRunAction*) const;
    void SetUserAction(G4UserEventAction*) const;
    void SetUserAction(G4UserStackingAction*) const;
    void SetUserAction(G4UserTrackingAction*) const;
    void SetUserAction(G4UserSteppingAction*) const;
};

G4VUserPrimaryGeneratorAction

Listing 86 G4VUserPrimaryGeneratorAction
class G4VUserPrimaryGeneratorAction
{
  public:
    G4VUserPrimaryGeneratorAction();
    virtual ~G4VUserPrimaryGeneratorAction();

  public:
    virtual void GeneratePrimaries(G4Event* anEvent) = 0;
};